Skocz do zawartości

NOTE PRO nie widzi karty SIM, nie mozna uzyskać nr IMEI


intelon12

Rekomendowane odpowiedzi

Witam,

Posiadam aparat NOTE PRO od 27/10/2015, kupiony na Ibuygou.com. Bez problemu udało mi się go "spolszczyć" wg poradnika z miuipolska.pl. Aparat działał pięknie, w międzyczasie zaktualizowałem rom na MIUIPolska_leo_5.11.12_v7-5.1.zip. Aparat działał bez problemu do 20/11/2015. W tym dniu przy próbie odblokowania ekranu telefon przywiesił się na moment i po wejściu na pulpit zniknął wcześniej ustawiony motyw, widget z notatkami, widget pogodowy i paru innych aplikacji oraz zaczęły pojawiać się błędy procesów: com.android.phone, nie można uzyskać numeru IMEI, brak mozliwości zalogowania się do chmury, nie znaleziono karty SIM (pomimo że cały czas była w slocie). Zauważyłem, że w przeciągu 40-60 minut bateria spadła z ok 50% do całkowitego rozładowania telefonu.

W pierwszej kolejności poszkuałem na forum podobnych przypadków, znalazłem posty kolegi Edwin07, który miał podobne objawy do moich. http://miuipolska.pl/forum/topic/4652-zawiesza-si%C4%99-na-logo-miui-polska/   Jemu akurat pomogło wgranie romu przez miflash.

Przed flashowaniem postanowiłem poszczegółnych wipów oraz przywrócenie z recovery, bez skutku. Przystapiłem do flashowania opisaną na tym forum metodą nr 2, czyli z wykorzystaniem Miflash - flash_all.bat. Niestety, ale w tej metodzie wywalało mi błąd ":remote: size too large". Po kilku próbach postanowiłem flashować metodą nr 1, czyli poprzez MiPCsuite i tym sposobem udało mi się wgrać "Xiaomi Mi Note Pro Latest Developer Version Fastboot File Download", następnie najnowszą aktualizację z MIUIPolska: 5.11.19.

W dalszym ciągu aparat nie wykrywa karty SIM, wywala com.android.phone, nie uzyskuje nr IMEI, WIFI strasznie długo się uruchamia.

Skończyły mi się już pomysły, więc postanowiłem napisać na forum. Może ktoś już przerabiał podobny przypadek. Telefon jest na gwarancji, może zareklamować go na ibuygou.com lub wysłać do serwisu we Wrocławiu? Z góry dziekuję za pomoc.

W załączeniu przesyłam zrzuty ekranu:

Screenshot_2015-11-23-00-13-52.pngScreenshot_2015-11-23-00-14-07.pngScreenshot_2015-11-23-00-14-21.png

Odnośnik do komentarza
Udostępnij na innych stronach

  • 8 miesięcy temu...

Osobiście posiadam Mi Note PRO i nie miałem takich problemów jak ty.

Czy próbowałeś zrobić miflasha z poziomu download? 

Podeślij screeny jak to robisz. Klikanaście  telefonów  zrobiłem już z miflasha.

Czy próbowałeś tego rozwiązania poniżej:;

https://mega.nz/#!tcAEkKCa!_7ft1wzFRUgwryxeeNiZQLuyKcTqSZu4wWcfcWPSM18

a tutaj instrukcja

 

Edytowane przez Zaku83
Odnośnik do komentarza
Udostępnij na innych stronach

wgralem rom przez Qfil i o to log

 

Validating Application Configuration
Load APP Configuration
COM:10
SAHARA:True
SAHARA:F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\prog_emmc_firehose_8994_lite.mbn
SEARCHPATH:F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images
RAWPROGRAM:
rawprogram0.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
VALIDATIONMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:False
Load ARG Configuration
Validating Download Configuration
Image Search Path: F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images
RAWPROGRAM file path: F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\rawprogram0.xml
PATCH file path:F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\patch0.xml
Programmer Path:F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\prog_emmc_firehose_8994_lite.mbn
Process Index:0
Start Download
Program Path:F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\prog_emmc_firehose_8994_lite.mbn
Binary build date: May 13 2015 @ 14:41:37
QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.exe -p \\.\COM10 -s 13:F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\prog_emmc_firehose_8994_lite.mbn 'Current working dir: C:\Users\pc\AppData\Roaming\Qualcomm\QFIL
Sahara mappings:
2: amss.mbn
6: apps.mbn
8: dsp1.mbn
10: dbl.mbn
11: osbl.mbn
12: dsp2.mbn
16: efs1.mbn
17: efs2.mbn
20: efs3.mbn
21: sbl1.mbn
22: sbl2.mbn
23: rpm.mbn
25: tz.mbn
28: dsp3.mbn
29: acdb.mbn
30: wdt.mbn
31: mba.mbn
13: F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\prog_emmc_firehose_8994_lite.mbn
00:14:10: Requested ID 13, file: "F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\prog_emmc_firehose_8994_lite.mbn"
00:14:16: 305488 bytes transferred in 6.318000 seconds (0.0461MBps)
00:14:16: File transferred successfully
NOTE: Target requested image 13 which is DeviceProgrammer. Forcing QUIT. This is by design, ** All is well ** SUCCESS!!
00:14:16: Sahara protocol completed
Sending Programmer Finished
Switch To FireHose
Wait for 3 seconds...
Max Payload Size to Target:49152 Bytes
Device Type:eMMC
Platform:8x26
Disable Ack Raw Data Every N Packets
Skip Write:False
Always Validate:False
Use Verbose:False
Binary build date: Jun  3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
00:14:20: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM10 --sendxml=rawprogram0.xml --search_path=F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
00:14:20: INFO: Current working dir (cwd): C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\
00:14:20: INFO: Showing network mappings to allow debugging
00:14:20: INFO:
00:14:20: INFO: Trying to store 'rawprogram0.xml' in string table
00:14:20: INFO: Looking for file 'rawprogram0.xml'
00:14:20: INFO: User wants to talk to port '\\.\COM10'
00:14:20: INFO: Took       0.00000000 seconds to open port
00:14:20: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
00:14:20: INFO: If  you don't want this, use --dontsorttags
00:14:20: INFO: Looking for file 'sbl1.mbn'
00:14:20: INFO: Looking for file 'sbl1.mbn'
00:14:20: INFO: Looking for file 'rpm.mbn'
00:14:20: INFO: Looking for file 'rpm.mbn'
00:14:20: INFO: Looking for file 'tz.mbn'
00:14:20: INFO: Looking for file 'tz.mbn'
00:14:20: INFO: Looking for file 'hyp.mbn'
00:14:20: INFO: Looking for file 'hyp.mbn'
00:14:20: INFO: Looking for file 'emmc_appsboot.mbn'
00:14:20: INFO: Looking for file 'emmc_appsboot.mbn'
00:14:20: INFO: Looking for file 'BTFM.bin'
00:14:20: INFO: Looking for file 'pmic.mbn'
00:14:20: INFO: Looking for file 'pmic.mbn'
00:14:20: INFO: Looking for file 'sdi.mbn'
00:14:20: INFO: Looking for file 'logo.img'
00:14:20: INFO: Looking for file 'bk2.img'
00:14:20: INFO: Looking for file 'NON-HLOS.bin'
00:14:20: INFO: Looking for file 'boot.img'
00:14:20: INFO: Looking for file 'recovery.img'
00:14:20: INFO: Looking for file 'system.img'
00:14:20: INFO: Looking for file 'cache.img'
00:14:20: INFO: Looking for file 'userdata.img'
00:14:20: INFO: Looking for file 'gpt_main0.bin'
00:14:20: INFO: Looking for file 'gpt_backup0.bin'
00:14:20: INFO:
Total to be tansferd with <program> or <read> is 2.00 GB
00:14:20: INFO: Sending <configure>
00:14:20: INFO: TARGET SAID: 'Binary build date: Aug 15 2016 @ 18:41:53
'
00:14:20: INFO: TARGET SAID: 'Chip serial num: 19674880 (0x12c3700)'
00:14:20: INFO: TARGET SAID: 'Supported Functions: program configure firmwarewrite patch setbootablestoragedrive ufs emmc power benchmark read getstorageinfo getsha256digest erase peek poke nop '
00:14:20: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
00:14:20: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
00:14:20: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 32768
00:14:20: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 32768
00:14:20: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
00:14:20: INFO: In handleProgram('sbl1.mbn')
00:14:20: INFO: Looking for file 'sbl1.mbn'
00:14:20: INFO: =======================================================
00:14:20: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\sbl1.mbn'}
00:14:20: INFO: {<program> (594.33 KB) 1189 sectors needed at location 34 on LUN 0}
00:14:20: INFO: =======================================================
00:14:20: INFO: TARGET SAID: 'start 34, num 1189'
00:14:20: INFO: FILE ACCESS SLOW!!  594.50 KB in  0.015 seconds (  38.70 MBps) --- Overall to target  0.062 seconds (9.36 MBps)
00:14:20: INFO: {percent files transferred   0.03%}
00:14:20: INFO: TARGET SAID: 'Finished sector address 1223'
00:14:20: INFO:
00:14:20: INFO: =======================================================
00:14:20: INFO: ==================== {SUCCESS} ========================
00:14:20: INFO: =======================================================
00:14:20: INFO: {percent files transferred   0.03%}
00:14:20: INFO: In handleProgram('sbl1.mbn')
00:14:20: INFO: Looking for file 'sbl1.mbn'
00:14:20: INFO: =======================================================
00:14:20: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\sbl1.mbn'}
00:14:20: INFO: {<program> (594.33 KB) 1189 sectors needed at location 4130 on LUN 0}
00:14:20: INFO: =======================================================
00:14:20: INFO: TARGET SAID: 'start 4130, num 1189'
00:14:20: INFO: FILE ACCESS SLOW!!  594.50 KB in  0.015 seconds (  38.70 MBps) --- Overall to target  0.031 seconds (18.73 MBps)
00:14:20: INFO: {percent files transferred   0.06%}
00:14:20: INFO: TARGET SAID: 'Finished sector address 5319'
00:14:20: INFO:
00:14:20: INFO: =======================================================
00:14:20: INFO: ==================== {SUCCESS} ========================
00:14:20: INFO: =======================================================
00:14:20: INFO: {percent files transferred   0.06%}
00:14:20: INFO: In handleProgram('rpm.mbn')
00:14:20: INFO: Looking for file 'rpm.mbn'
00:14:20: INFO: =======================================================
00:14:20: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\rpm.mbn'}
00:14:20: INFO: {<program> (190.68 KB) 382 sectors needed at location 8226 on LUN 0}
00:14:20: INFO: =======================================================
00:14:20: INFO: TARGET SAID: 'start 8226, num 382'
00:14:20: INFO: FILE ACCESS SLOW!!  191.00 KB in  0.015 seconds (  12.43 MBps) --- Overall to target  0.031 seconds (6.02 MBps)
00:14:20: INFO: {percent files transferred   0.07%}
00:14:21: INFO: TARGET SAID: 'Finished sector address 8608'
00:14:21: INFO:
00:14:21: INFO: =======================================================
00:14:21: INFO: ==================== {SUCCESS} ========================
00:14:21: INFO: =======================================================
00:14:21: INFO: {percent files transferred   0.07%}
00:14:21: INFO: In handleProgram('rpm.mbn')
00:14:21: INFO: Looking for file 'rpm.mbn'
00:14:21: INFO: =======================================================
00:14:21: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\rpm.mbn'}
00:14:21: INFO: {<program> (190.68 KB) 382 sectors needed at location 10274 on LUN 0}
00:14:21: INFO: =======================================================
00:14:21: INFO: TARGET SAID: 'start 10274, num 382'
00:14:21: INFO: FILE ACCESS SLOW!!  191.00 KB in  0.015 seconds (  12.43 MBps) --- Overall to target  0.016 seconds (11.66 MBps)
00:14:21: INFO: {percent files transferred   0.07%}
00:14:21: INFO: TARGET SAID: 'Finished sector address 10656'
00:14:21: INFO:
00:14:21: INFO: =======================================================
00:14:21: INFO: ==================== {SUCCESS} ========================
00:14:21: INFO: =======================================================
00:14:21: INFO: {percent files transferred   0.07%}
00:14:21: INFO: In handleProgram('tz.mbn')
00:14:21: INFO: Looking for file 'tz.mbn'
00:14:21: INFO: =======================================================
00:14:21: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\tz.mbn'}
00:14:21: INFO: {<program> (515.38 KB) 1031 sectors needed at location 12322 on LUN 0}
00:14:21: INFO: =======================================================
00:14:21: INFO: TARGET SAID: 'start 12322, num 1031'
00:14:21: INFO: FILE ACCESS SLOW!!  515.50 KB in  0.015 seconds (  33.56 MBps) --- Overall to target  0.046 seconds (10.94 MBps)
00:14:21: INFO: {percent files transferred   0.10%}
00:14:21: INFO: TARGET SAID: 'Finished sector address 13353'
00:14:21: INFO:
00:14:21: INFO: =======================================================
00:14:21: INFO: ==================== {SUCCESS} ========================
00:14:21: INFO: =======================================================
00:14:21: INFO: {percent files transferred   0.10%}
00:14:21: INFO: In handleProgram('tz.mbn')
00:14:21: INFO: Looking for file 'tz.mbn'
00:14:21: INFO: =======================================================
00:14:21: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\tz.mbn'}
00:14:21: INFO: {<program> (515.38 KB) 1031 sectors needed at location 14370 on LUN 0}
00:14:21: INFO: =======================================================
00:14:21: INFO: TARGET SAID: 'start 14370, num 1031'
00:14:21: INFO: FILE ACCESS SLOW!!  515.50 KB in  0.015 seconds (  33.56 MBps) --- Overall to target  0.047 seconds (10.71 MBps)
00:14:21: INFO: {percent files transferred   0.12%}
00:14:21: INFO: TARGET SAID: 'Finished sector address 15401'
00:14:21: INFO:
00:14:21: INFO: =======================================================
00:14:21: INFO: ==================== {SUCCESS} ========================
00:14:21: INFO: =======================================================
00:14:21: INFO: {percent files transferred   0.12%}
00:14:21: INFO: In handleProgram('hyp.mbn')
00:14:21: INFO: Looking for file 'hyp.mbn'
00:14:21: INFO: =======================================================
00:14:21: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\hyp.mbn'}
00:14:21: INFO: {<program> (65.00 KB) 130 sectors needed at location 16434 on LUN 0}
00:14:21: INFO: =======================================================
00:14:21: INFO: TARGET SAID: 'start 16434, num 130'
00:14:21: INFO: FILE ACCESS SLOW!!   65.00 KB in  0.015 seconds (   4.23 MBps) --- Overall to target  0.015 seconds (4.23 MBps)
00:14:21: INFO: {percent files transferred   0.13%}
00:14:21: INFO: TARGET SAID: 'Finished sector address 16564'
00:14:21: INFO:
00:14:21: INFO: =======================================================
00:14:21: INFO: ==================== {SUCCESS} ========================
00:14:21: INFO: =======================================================
00:14:21: INFO: {percent files transferred   0.13%}
00:14:21: INFO: In handleProgram('hyp.mbn')
00:14:21: INFO: Looking for file 'hyp.mbn'
00:14:21: INFO: =======================================================
00:14:21: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\hyp.mbn'}
00:14:21: INFO: {<program> (65.00 KB) 130 sectors needed at location 18482 on LUN 0}
00:14:21: INFO: =======================================================
00:14:22: INFO: TARGET SAID: 'start 18482, num 130'
00:14:22: INFO: FILE ACCESS SLOW!!   65.00 KB in  0.015 seconds (   4.23 MBps) --- Overall to target  0.010 seconds (6.35 MBps)
00:14:22: INFO: {percent files transferred   0.13%}
00:14:22: INFO: TARGET SAID: 'Finished sector address 18612'
00:14:22: INFO:
00:14:22: INFO: =======================================================
00:14:22: INFO: ==================== {SUCCESS} ========================
00:14:22: INFO: =======================================================
00:14:22: INFO: {percent files transferred   0.13%}
00:14:22: INFO: In handleProgram('emmc_appsboot.mbn')
00:14:22: INFO: Looking for file 'emmc_appsboot.mbn'
00:14:22: INFO: =======================================================
00:14:22: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\emmc_appsboot.mbn'}
00:14:22: INFO: {<program> (481.53 KB) 964 sectors needed at location 22578 on LUN 0}
00:14:22: INFO: =======================================================
00:14:22: INFO: TARGET SAID: 'start 22578, num 964'
00:14:22: INFO: FILE ACCESS SLOW!!  482.00 KB in  0.015 seconds (  31.38 MBps) --- Overall to target  0.047 seconds (10.01 MBps)
00:14:22: INFO: {percent files transferred   0.15%}
00:14:22: INFO: TARGET SAID: 'Finished sector address 23542'
00:14:22: INFO:
00:14:22: INFO: =======================================================
00:14:22: INFO: ==================== {SUCCESS} ========================
00:14:22: INFO: =======================================================
00:14:22: INFO: {percent files transferred   0.15%}
00:14:22: INFO: In handleProgram('emmc_appsboot.mbn')
00:14:22: INFO: Looking for file 'emmc_appsboot.mbn'
00:14:22: INFO: =======================================================
00:14:22: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\emmc_appsboot.mbn'}
00:14:22: INFO: {<program> (481.53 KB) 964 sectors needed at location 30770 on LUN 0}
00:14:22: INFO: =======================================================
00:14:22: INFO: TARGET SAID: 'start 30770, num 964'
00:14:22: INFO: FILE ACCESS SLOW!!  482.00 KB in  0.015 seconds (  31.38 MBps) --- Overall to target  0.031 seconds (15.18 MBps)
00:14:22: INFO: {percent files transferred   0.18%}
00:14:22: INFO: TARGET SAID: 'Finished sector address 31734'
00:14:22: INFO:
00:14:22: INFO: =======================================================
00:14:22: INFO: ==================== {SUCCESS} ========================
00:14:22: INFO: =======================================================
00:14:22: INFO: {percent files transferred   0.18%}
00:14:22: INFO: In handleProgram('BTFM.bin')
00:14:22: INFO: Looking for file 'BTFM.bin'
00:14:22: INFO: =======================================================
00:14:22: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\BTFM.bin'}
00:14:22: INFO: {<program> (97.50 KB) 195 sectors needed at location 47154 on LUN 0}
00:14:22: INFO: =======================================================
00:14:22: INFO: TARGET SAID: 'start 47154, num 195'
00:14:22: INFO: FILE ACCESS SLOW!!   97.50 KB in  0.015 seconds (   6.35 MBps) --- Overall to target  0.010 seconds (9.52 MBps)
00:14:22: INFO: {percent files transferred   0.18%}
00:14:22: INFO: TARGET SAID: 'Finished sector address 47349'
00:14:22: INFO:
00:14:22: INFO: =======================================================
00:14:22: INFO: ==================== {SUCCESS} ========================
00:14:22: INFO: =======================================================
00:14:22: INFO: {percent files transferred   0.18%}
00:14:22: INFO: In handleProgram('pmic.mbn')
00:14:22: INFO: Looking for file 'pmic.mbn'
00:14:22: INFO: =======================================================
00:14:22: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\pmic.mbn'}
00:14:22: INFO: {<program> (38.16 KB) 77 sectors needed at location 49202 on LUN 0}
00:14:22: INFO: =======================================================
00:14:22: INFO: TARGET SAID: 'start 49202, num 77'
00:14:22: INFO: FILE ACCESS SLOW!!   38.50 KB in  0.015 seconds (   2.51 MBps) --- Overall to target  0.010 seconds (3.76 MBps)
00:14:22: INFO: {percent files transferred   0.18%}
00:14:23: INFO: TARGET SAID: 'Finished sector address 49279'
00:14:23: INFO:
00:14:23: INFO: =======================================================
00:14:23: INFO: ==================== {SUCCESS} ========================
00:14:23: INFO: =======================================================
00:14:23: INFO: {percent files transferred   0.18%}
00:14:23: INFO: In handleProgram('pmic.mbn')
00:14:23: INFO: Looking for file 'pmic.mbn'
00:14:23: INFO: =======================================================
00:14:23: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\pmic.mbn'}
00:14:23: INFO: {<program> (38.16 KB) 77 sectors needed at location 49458 on LUN 0}
00:14:23: INFO: =======================================================
00:14:23: INFO: TARGET SAID: 'start 49458, num 77'
00:14:23: INFO: FILE ACCESS SLOW!!   38.50 KB in  0.015 seconds (   2.51 MBps) --- Overall to target  0.010 seconds (3.76 MBps)
00:14:23: INFO: {percent files transferred   0.18%}
00:14:23: INFO: TARGET SAID: 'Finished sector address 49535'
00:14:23: INFO:
00:14:23: INFO: =======================================================
00:14:23: INFO: ==================== {SUCCESS} ========================
00:14:23: INFO: =======================================================
00:14:23: INFO: {percent files transferred   0.18%}
00:14:23: INFO: In handleProgram('sdi.mbn')
00:14:23: INFO: Looking for file 'sdi.mbn'
00:14:23: INFO: =======================================================
00:14:23: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\sdi.mbn'}
00:14:23: INFO: {<program> (34.34 KB) 69 sectors needed at location 50742 on LUN 0}
00:14:23: INFO: =======================================================
00:14:23: INFO: TARGET SAID: 'start 50742, num 69'
00:14:23: INFO: FILE ACCESS SLOW!!   34.50 KB in  0.015 seconds (   2.25 MBps) --- Overall to target  0.010 seconds (3.37 MBps)
00:14:23: INFO: {percent files transferred   0.19%}
00:14:23: INFO: TARGET SAID: 'Finished sector address 50811'
00:14:23: INFO:
00:14:23: INFO: =======================================================
00:14:23: INFO: ==================== {SUCCESS} ========================
00:14:23: INFO: =======================================================
00:14:23: INFO: {percent files transferred   0.19%}
00:14:23: INFO: In handleProgram('logo.img')
00:14:23: INFO: Looking for file 'logo.img'
00:14:23: INFO: =======================================================
00:14:23: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\logo.img'}
00:14:23: INFO: {<program> (2.26 MB) 4637 sectors needed at location 55032 on LUN 0}
00:14:23: INFO: =======================================================
00:14:23: INFO: TARGET SAID: 'start 55032, num 4637'
00:14:23: INFO: Overall to target  0.156 seconds (14.51 MBps)
00:14:23: INFO: {percent files transferred   0.30%}
00:14:23: INFO: TARGET SAID: 'Finished sector address 59669'
00:14:23: INFO:
00:14:23: INFO: =======================================================
00:14:23: INFO: ==================== {SUCCESS} ========================
00:14:23: INFO: =======================================================
00:14:23: INFO: {percent files transferred   0.30%}
00:14:23: INFO: In handleProgram('bk2.img')
00:14:23: INFO: Looking for file 'bk2.img'
00:14:23: INFO: =======================================================
00:14:23: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\bk2.img'}
00:14:23: INFO: {<program> (246.59 KB) 494 sectors needed at location 137218 on LUN 0}
00:14:23: INFO: =======================================================
00:14:23: INFO: TARGET SAID: 'start 137218, num 494'
00:14:23: INFO: FILE ACCESS SLOW!!  247.00 KB in  0.015 seconds (  16.08 MBps) --- Overall to target  0.016 seconds (15.08 MBps)
00:14:23: INFO: {percent files transferred   0.31%}
00:14:24: INFO: TARGET SAID: 'Finished sector address 137712'
00:14:24: INFO:
00:14:24: INFO: =======================================================
00:14:24: INFO: ==================== {SUCCESS} ========================
00:14:24: INFO: =======================================================
00:14:24: INFO: {percent files transferred   0.31%}
00:14:24: INFO: In handleProgram('NON-HLOS.bin')
00:14:24: INFO: Looking for file 'NON-HLOS.bin'
00:14:24: INFO: =======================================================
00:14:24: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\NON-HLOS.bin'}
00:14:24: INFO: {<program> (70.27 MB) 143907 sectors needed at location 393216 on LUN 0}
00:14:24: INFO: =======================================================
00:14:24: INFO: TARGET SAID: 'start 393216, num 143907'
00:14:26: INFO: Overall to target  2.013 seconds (14.28 MBps)
00:14:26: INFO: {percent files transferred   1.71%}
00:14:28: INFO: Overall to target  4.025 seconds (14.19 MBps)
00:14:28: INFO: {percent files transferred   3.09%}
00:14:29: INFO: Overall to target  4.930 seconds (14.25 MBps)
00:14:29: INFO: {percent files transferred   3.73%}
00:14:29: INFO: TARGET SAID: 'Finished sector address 537123'
00:14:29: INFO:
00:14:29: INFO: =======================================================
00:14:29: INFO: ==================== {SUCCESS} ========================
00:14:29: INFO: =======================================================
00:14:29: INFO: {percent files transferred   3.73%}
00:14:29: INFO: In handleProgram('boot.img')
00:14:29: INFO: Looking for file 'boot.img'
00:14:29: INFO: =======================================================
00:14:29: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\boot.img'}
00:14:29: INFO: {<program> (41.18 MB) 84339 sectors needed at location 655360 on LUN 0}
00:14:29: INFO: =======================================================
00:14:29: INFO: TARGET SAID: 'start 655360, num 84339'
00:14:31: INFO: Overall to target  2.012 seconds (14.15 MBps)
00:14:31: INFO: {percent files transferred   5.12%}
00:14:32: INFO: Overall to target  2.886 seconds (14.27 MBps)
00:14:32: INFO: {percent files transferred   5.74%}
00:14:32: INFO: TARGET SAID: 'Finished sector address 739699'
00:14:32: INFO:
00:14:32: INFO: =======================================================
00:14:32: INFO: ==================== {SUCCESS} ========================
00:14:32: INFO: =======================================================
00:14:32: INFO: {percent files transferred   5.74%}
00:14:32: INFO: In handleProgram('recovery.img')
00:14:32: INFO: Looking for file 'recovery.img'
00:14:32: INFO: =======================================================
00:14:32: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\recovery.img'}
00:14:32: INFO: {<program> (42.23 MB) 86491 sectors needed at location 786432 on LUN 0}
00:14:32: INFO: =======================================================
00:14:32: INFO: TARGET SAID: 'start 786432, num 86491'
00:14:34: INFO: Overall to target  2.013 seconds (14.27 MBps)
00:14:34: INFO: {percent files transferred   7.14%}
00:14:35: INFO: Overall to target  2.949 seconds (14.32 MBps)
00:14:35: INFO: {percent files transferred   7.79%}
00:14:35: INFO: TARGET SAID: 'Finished sector address 872923'
00:14:35: INFO:
00:14:35: INFO: =======================================================
00:14:35: INFO: ==================== {SUCCESS} ========================
00:14:35: INFO: =======================================================
00:14:35: INFO: {percent files transferred   7.79%}
00:14:35: INFO: In handleProgram('system.img')
00:14:35: INFO: Looking for file 'system.img'
00:14:35: INFO: =======================================================
00:14:35: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\system.img'}
00:14:35: INFO: {<program> (1.07 GB) 2239890 sectors needed at location 1048576 on LUN 0}
00:14:35: INFO: =======================================================
00:14:35: INFO: TARGET SAID: 'start 1048576, num 2239890'
00:14:37: INFO: Overall to target  2.012 seconds (14.20 MBps)
00:14:37: INFO: {percent files transferred   9.19%}
00:14:39: INFO: Overall to target  4.025 seconds (14.25 MBps)
00:14:39: INFO: {percent files transferred  10.59%}
00:14:41: INFO: Overall to target  6.037 seconds (14.29 MBps)
00:14:41: INFO: {percent files transferred  12.00%}
00:14:43: INFO: Overall to target  8.050 seconds (14.25 MBps)
00:14:43: INFO: {percent files transferred  13.38%}
00:14:45: INFO: Overall to target 10.062 seconds (14.24 MBps)
00:14:45: INFO: {percent files transferred  14.78%}
00:14:47: INFO: Overall to target 12.074 seconds (14.23 MBps)
00:14:47: INFO: {percent files transferred  16.17%}
00:14:49: INFO: Overall to target 14.087 seconds (14.22 MBps)
00:14:49: INFO: {percent files transferred  17.55%}
00:14:51: INFO: Overall to target 16.099 seconds (14.21 MBps)
00:14:51: INFO: {percent files transferred  18.94%}
00:14:53: INFO: Overall to target 18.112 seconds (14.19 MBps)
00:14:53: INFO: {percent files transferred  20.32%}
00:14:55: INFO: Overall to target 20.124 seconds (14.20 MBps)
00:14:55: INFO: {percent files transferred  21.71%}
00:14:57: INFO: Overall to target 22.137 seconds (14.21 MBps)
00:14:57: INFO: {percent files transferred  23.11%}
00:14:59: INFO: Overall to target 24.149 seconds (14.22 MBps)
00:14:59: INFO: {percent files transferred  24.53%}
00:15:01: INFO: Overall to target 26.161 seconds (14.22 MBps)
00:15:01: INFO: {percent files transferred  25.91%}
00:15:03: INFO: Overall to target 28.174 seconds (14.22 MBps)
00:15:03: INFO: {percent files transferred  27.31%}
00:15:05: INFO: Overall to target 30.186 seconds (14.22 MBps)
00:15:05: INFO: {percent files transferred  28.71%}
00:15:07: INFO: Overall to target 32.199 seconds (14.23 MBps)
00:15:07: INFO: {percent files transferred  30.11%}
00:15:09: INFO: Overall to target 34.211 seconds (14.23 MBps)
00:15:09: INFO: {percent files transferred  31.51%}
00:15:11: INFO: Overall to target 36.223 seconds (14.22 MBps)
00:15:11: INFO: {percent files transferred  32.89%}
00:15:13: INFO: Overall to target 38.236 seconds (14.22 MBps)
00:15:13: INFO: {percent files transferred  34.29%}
00:15:15: INFO: Overall to target 40.248 seconds (14.23 MBps)
00:15:15: INFO: {percent files transferred  35.69%}
00:15:17: INFO: Overall to target 42.261 seconds (14.22 MBps)
00:15:17: INFO: {percent files transferred  37.07%}
00:15:19: INFO: Overall to target 44.273 seconds (14.22 MBps)
00:15:19: INFO: {percent files transferred  38.46%}
00:15:21: INFO: Overall to target 46.286 seconds (14.22 MBps)
00:15:21: INFO: {percent files transferred  39.85%}
00:15:23: INFO: Overall to target 48.298 seconds (14.21 MBps)
00:15:23: INFO: {percent files transferred  41.23%}
00:15:25: INFO: Overall to target 50.310 seconds (14.21 MBps)
00:15:25: INFO: {percent files transferred  42.61%}
00:15:27: INFO: Overall to target 52.323 seconds (14.20 MBps)
00:15:27: INFO: {percent files transferred  43.99%}
00:15:29: INFO: Overall to target 54.335 seconds (14.20 MBps)
00:15:29: INFO: {percent files transferred  45.38%}
00:15:31: INFO: Overall to target 56.348 seconds (14.19 MBps)
00:15:31: INFO: {percent files transferred  46.76%}
00:15:33: INFO: Overall to target 58.360 seconds (14.19 MBps)
00:15:33: INFO: {percent files transferred  48.14%}
00:15:35: INFO: Overall to target 60.372 seconds (14.19 MBps)
00:15:35: INFO: {percent files transferred  49.54%}
00:15:37: INFO: Overall to target 62.385 seconds (14.20 MBps)
00:15:37: INFO: {percent files transferred  50.95%}
00:15:39: INFO: Overall to target 64.397 seconds (14.20 MBps)
00:15:39: INFO: {percent files transferred  52.34%}
00:15:41: INFO: Overall to target 66.410 seconds (14.19 MBps)
00:15:41: INFO: {percent files transferred  53.72%}
00:15:44: INFO: Overall to target 68.422 seconds (14.19 MBps)
00:15:44: INFO: {percent files transferred  55.10%}
00:15:46: INFO: Overall to target 70.434 seconds (14.19 MBps)
00:15:46: INFO: {percent files transferred  56.49%}
00:15:48: INFO: Overall to target 72.447 seconds (14.20 MBps)
00:15:48: INFO: {percent files transferred  57.90%}
00:15:50: INFO: Overall to target 74.459 seconds (14.19 MBps)
00:15:50: INFO: {percent files transferred  59.28%}
00:15:52: INFO: Overall to target 76.472 seconds (14.19 MBps)
00:15:52: INFO: {percent files transferred  60.66%}
00:15:52: INFO: Overall to target 77.065 seconds (14.19 MBps)
00:15:52: INFO: {percent files transferred  61.08%}
00:15:52: INFO: TARGET SAID: 'Finished sector address 3288466'
00:15:52: INFO:
00:15:52: INFO: =======================================================
00:15:52: INFO: ==================== {SUCCESS} ========================
00:15:52: INFO: =======================================================
00:15:52: INFO: {percent files transferred  61.08%}
00:15:52: INFO: In handleProgram('cache.img')
00:15:52: INFO: Looking for file 'cache.img'
00:15:52: INFO: =======================================================
00:15:52: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\cache.img'}
00:15:52: INFO: {<program> (6.10 MB) 12497 sectors needed at location 4456448 on LUN 0}
00:15:52: INFO: =======================================================
00:15:52: INFO: TARGET SAID: 'start 4456448, num 12497'
00:15:53: INFO: Overall to target  0.437 seconds (13.96 MBps)
00:15:53: INFO: {percent files transferred  61.37%}
00:15:53: INFO: TARGET SAID: 'Finished sector address 4468945'
00:15:53: INFO:
00:15:53: INFO: =======================================================
00:15:53: INFO: ==================== {SUCCESS} ========================
00:15:53: INFO: =======================================================
00:15:53: INFO: {percent files transferred  61.37%}
00:15:53: INFO: In handleProgram('userdata.img')
00:15:53: INFO: Looking for file 'userdata.img'
00:15:53: INFO: =======================================================
00:15:53: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\userdata.img'}
00:15:53: INFO: {<program> (792.86 MB) 1623768 sectors needed at location 5242880 on LUN 0}
00:15:53: INFO: =======================================================
00:15:53: INFO: TARGET SAID: 'start 5242880, num 1623768'
00:15:55: INFO: Overall to target  2.012 seconds (14.03 MBps)
00:15:55: INFO: {percent files transferred  62.75%}
00:15:57: INFO: Overall to target  4.025 seconds (14.03 MBps)
00:15:57: INFO: {percent files transferred  64.12%}
00:15:59: INFO: Overall to target  6.037 seconds (14.14 MBps)
00:15:59: INFO: {percent files transferred  65.53%}
00:16:01: INFO: Overall to target  8.050 seconds (14.19 MBps)
00:16:01: INFO: {percent files transferred  66.94%}
00:16:03: INFO: Overall to target 10.062 seconds (14.21 MBps)
00:16:03: INFO: {percent files transferred  68.34%}
00:16:05: INFO: Overall to target 12.074 seconds (14.24 MBps)
00:16:05: INFO: {percent files transferred  69.75%}
00:16:07: INFO: Overall to target 14.087 seconds (14.24 MBps)
00:16:07: INFO: {percent files transferred  71.15%}
00:16:09: INFO: Overall to target 16.099 seconds (14.24 MBps)
00:16:09: INFO: {percent files transferred  72.54%}
00:16:11: INFO: Overall to target 18.112 seconds (14.25 MBps)
00:16:11: INFO: {percent files transferred  73.95%}
00:16:13: INFO: Overall to target 20.124 seconds (14.26 MBps)
00:16:13: INFO: {percent files transferred  75.35%}
00:16:15: INFO: Overall to target 22.136 seconds (14.25 MBps)
00:16:15: INFO: {percent files transferred  76.74%}
00:16:17: INFO: Overall to target 24.149 seconds (14.24 MBps)
00:16:17: INFO: {percent files transferred  78.12%}
00:16:19: INFO: Overall to target 26.161 seconds (14.24 MBps)
00:16:19: INFO: {percent files transferred  79.53%}
00:16:21: INFO: Overall to target 28.174 seconds (14.25 MBps)
00:16:21: INFO: {percent files transferred  80.93%}
00:16:23: INFO: Overall to target 30.186 seconds (14.24 MBps)
00:16:23: INFO: {percent files transferred  82.31%}
00:16:25: INFO: Overall to target 32.199 seconds (14.25 MBps)
00:16:25: INFO: {percent files transferred  83.72%}
00:16:27: INFO: Overall to target 34.211 seconds (14.24 MBps)
00:16:27: INFO: {percent files transferred  85.11%}
00:16:29: INFO: Overall to target 36.223 seconds (14.24 MBps)
00:16:29: INFO: {percent files transferred  86.50%}
00:16:31: INFO: Overall to target 38.236 seconds (14.24 MBps)
00:16:31: INFO: {percent files transferred  87.90%}
00:16:33: INFO: Overall to target 40.248 seconds (14.24 MBps)
00:16:33: INFO: {percent files transferred  89.30%}
00:16:35: INFO: Overall to target 42.261 seconds (14.25 MBps)
00:16:35: INFO: {percent files transferred  90.70%}
00:16:37: INFO: Overall to target 44.273 seconds (14.25 MBps)
00:16:37: INFO: {percent files transferred  92.10%}
00:16:39: INFO: Overall to target 46.285 seconds (14.25 MBps)
00:16:39: INFO: {percent files transferred  93.50%}
00:16:41: INFO: Overall to target 48.298 seconds (14.24 MBps)
00:16:41: INFO: {percent files transferred  94.89%}
00:16:43: INFO: Overall to target 50.310 seconds (14.25 MBps)
00:16:43: INFO: {percent files transferred  96.29%}
00:16:45: INFO: Overall to target 52.323 seconds (14.25 MBps)
00:16:45: INFO: {percent files transferred  97.70%}
00:16:47: INFO: Overall to target 54.335 seconds (14.25 MBps)
00:16:47: INFO: {percent files transferred  99.10%}
00:16:49: INFO: Overall to target 55.630 seconds (14.25 MBps)
00:16:49: INFO: {percent files transferred 100.00%}
00:16:49: INFO: TARGET SAID: 'Finished sector address 6866648'
00:16:49: INFO:
00:16:49: INFO: =======================================================
00:16:49: INFO: ==================== {SUCCESS} ========================
00:16:49: INFO: =======================================================
00:16:49: INFO: {percent files transferred 100.00%}
00:16:49: INFO: In handleProgram('gpt_main0.bin')
00:16:49: INFO: Looking for file 'gpt_main0.bin'
00:16:49: INFO: =======================================================
00:16:49: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\gpt_main0.bin'}
00:16:49: INFO: {<program> (17.00 KB) 34 sectors needed at location 0 on LUN 0}
00:16:49: INFO: =======================================================
00:16:49: INFO: TARGET SAID: 'start 0, num 34'
00:16:49: INFO: FILE ACCESS SLOW!!   17.00 KB in  0.015 seconds (   1.11 MBps) --- Overall to target  0.015 seconds (1.11 MBps)
00:16:49: INFO: {percent files transferred 100.00%}
00:16:49: INFO: TARGET SAID: 'Finished sector address 34'
00:16:49: INFO:
00:16:49: INFO: =======================================================
00:16:49: INFO: ==================== {SUCCESS} ========================
00:16:49: INFO: =======================================================
00:16:49: INFO: {percent files transferred 100.00%}
00:16:49: INFO: In handleProgram('gpt_backup0.bin')
00:16:49: INFO: Looking for file 'gpt_backup0.bin'
00:16:49: INFO: =======================================================
00:16:49: INFO: {<program> FILE: 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\gpt_backup0.bin'}
00:16:49: INFO: {<program> (16.50 KB) 33 sectors needed at location 0 on LUN 0}
00:16:49: INFO: =======================================================
00:16:49: INFO: TARGET SAID: 'start 122142687, num 33'
00:16:49: INFO: FILE ACCESS SLOW!!   16.50 KB in  0.015 seconds (   1.07 MBps) --- Overall to target  0.016 seconds (1.01 MBps)
00:16:49: INFO: {percent files transferred 100.00%}
00:16:49: INFO: TARGET SAID: 'Finished sector address 122142720'
00:16:49: INFO:
00:16:49: INFO: =======================================================
00:16:49: INFO: ==================== {SUCCESS} ========================
00:16:49: INFO: =======================================================
00:16:49: INFO: {percent files transferred 100.00%}
00:16:49: INFO: ==============================================================
00:16:49: INFO: Files used and their paths
00:16:49: INFO:   1 'C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
00:16:49: INFO:   2 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\rawprogram0.xml'
00:16:49: INFO:   3 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\sbl1.mbn'
00:16:49: INFO:   4 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\rpm.mbn'
00:16:49: INFO:   5 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\tz.mbn'
00:16:49: INFO:   6 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\hyp.mbn'
00:16:49: INFO:   7 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\emmc_appsboot.mbn'
00:16:49: INFO:   8 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\BTFM.bin'
00:16:49: INFO:   9 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\pmic.mbn'
00:16:49: INFO:  10 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\sdi.mbn'
00:16:49: INFO:  11 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\logo.img'
00:16:49: INFO:  12 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\bk2.img'
00:16:49: INFO:  13 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\NON-HLOS.bin'
00:16:49: INFO:  14 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\boot.img'
00:16:49: INFO:  15 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\recovery.img'
00:16:49: INFO:  16 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\system.img'
00:16:49: INFO:  17 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\cache.img'
00:16:49: INFO:  18 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\userdata.img'
00:16:49: INFO:  19 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\gpt_main0.bin'
00:16:49: INFO:  20 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\gpt_backup0.bin'
00:16:49: INFO:      _             (done)
00:16:49: INFO:     | |                 
00:16:49: INFO:   __| | ___  _ __   ___
00:16:49: INFO:  / _` |/ _ \| '_ \ / _ \
00:16:49: INFO: | (_| | (_) | | | |  __/
00:16:49: INFO:  \__,_|\___/|_| |_|\___|
00:16:49: INFO: {All Finished Successfully}
00:16:49: INFO: Overall to target 149.480 seconds (13.73 MBps)
00:16:49: INFO: {percent files transferred 100.00%}
Writing log to 'C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Jun  3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
00:16:50: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM10 --sendxml=patch0.xml --search_path=F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC
************************************************
00:16:50: INFO: Current working dir (cwd): C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\
00:16:50: INFO: Showing network mappings to allow debugging
00:16:50: INFO:
00:16:50: INFO: Trying to store 'patch0.xml' in string table
00:16:50: INFO: Looking for file 'patch0.xml'
00:16:50: INFO: User wants to talk to port '\\.\COM10'
00:16:50: INFO: Took       0.00000000 seconds to open port
00:16:50: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
00:16:50: INFO: If  you don't want this, use --dontsorttags
00:16:50: INFO: Sending <configure>
00:16:50: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
00:16:50: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
00:16:50: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 32768
00:16:50: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 32768
00:16:50: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
00:16:50: INFO: TARGET SAID: 'Patched sector 12 with 0747BFDE'
00:16:50: INFO: TARGET SAID: 'Patched sector 122142697 with 0747BFDE'
00:16:50: INFO: TARGET SAID: 'Patched sector 1 with 0747BFDE'
00:16:50: INFO: TARGET SAID: 'Patched sector 122142719 with 0747BFDE'
00:16:50: INFO: TARGET SAID: 'Patched sector 1 with 0747BFFF'
00:16:50: INFO: TARGET SAID: 'Patched sector 122142719 with 0747BFFF'
00:16:50: INFO: TARGET SAID: 'Patched sector 122142719 with 0747BFDF'
00:16:51: INFO: TARGET SAID: 'crc start sector 2, over bytes 5632'
00:16:51: INFO: TARGET SAID: 'Patched sector 1 with A6A4CE31'
00:16:51: INFO: TARGET SAID: 'crc start sector 122142687, over bytes 5632'
00:16:51: INFO: TARGET SAID: 'Patched sector 122142719 with A6A4CE31'
00:16:51: INFO: TARGET SAID: 'Patched sector 1 with 00000000'
00:16:51: INFO: TARGET SAID: 'crc start sector 1, over bytes 92'
00:16:51: INFO: TARGET SAID: 'Patched sector 1 with 18E32071'
00:16:51: INFO: TARGET SAID: 'Patched sector 122142719 with 00000000'
00:16:51: INFO: TARGET SAID: 'crc start sector 122142719, over bytes 92'
00:16:51: INFO: TARGET SAID: 'Patched sector 122142719 with F121FBB5'
00:16:51: INFO: ==============================================================
00:16:51: INFO: Files used and their paths
00:16:51: INFO:   1 'C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
00:16:51: INFO:   2 'F:\leo_images_6.8.18_20160805.0000.29_5.1_cn_8606199a26\leo_images_6.8.18_20160805.0000.29_5.1_cn\images\patch0.xml'
00:16:51: INFO:      _             (done)
00:16:51: INFO:     | |                 
00:16:51: INFO:   __| | ___  _ __   ___
00:16:51: INFO:  / _` |/ _ \| '_ \ / _ \
00:16:51: INFO: | (_| | (_) | | | |  __/
00:16:51: INFO:  \__,_|\___/|_| |_|\___|
00:16:51: INFO: {All Finished Successfully}
00:16:51: INFO: FILE ACCESS SLOW!!     0.00 B in  0.015 seconds (    0.00 Bps) --- Overall to target  1.419 seconds (0.00 Bps)
Writing log to 'C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Binary build date: Jun  3 2015 @ 17:12:06
Build version: 15.06. 3.17.12.06
00:16:51: INFO: FH_LOADER WAS CALLED EXACTLY LIKE THIS
************************************************
C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe --port=\\.\COM10 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=eMMC --setactivepartition=0
************************************************
00:16:51: INFO: Current working dir (cwd): C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\
00:16:51: INFO: Showing network mappings to allow debugging
00:16:51: INFO: User wants to talk to port '\\.\COM10'
00:16:51: INFO: Took       0.00000000 seconds to open port
00:16:51: INFO: Sorting TAGS to ensure order is <configure>,<erase>, others, <patch>,<power>
00:16:51: INFO: If  you don't want this, use --dontsorttags
00:16:51: INFO: Sending <configure>
00:16:52: INFO: TARGET SAID: 'fh.attrs.MaxPayloadSizeToTargetInBytes _ FIREHOSE_CHANNEL_BUFFER_SIZE'
00:16:52: INFO: TARGET SAID: 'Calling hotplug_poll_device('MMC')'
00:16:52: INFO: fh.attrs.MaxPayloadSizeToTargetInBytes = 32768
00:16:52: INFO: fh.attrs.MaxPayloadSizeToTargetInBytesSupported = 32768
00:16:52: INFO: Target returned NAK for your <configure> but it does not seem to be an error. This is ok, fh_loader.exe attributes updated
00:16:52: INFO: Sending <setbootablestoragedrive>
00:16:52: INFO: ==============================================================
00:16:52: INFO: Files used and their paths
00:16:52: INFO:   1 'C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
00:16:52: INFO:      _             (done)
00:16:52: INFO:     | |                 
00:16:52: INFO:   __| | ___  _ __   ___
00:16:52: INFO:  / _` |/ _ \| '_ \ / _ \
00:16:52: INFO: | (_| | (_) | | | |  __/
00:16:52: INFO:  \__,_|\___/|_| |_|\___|
00:16:52: INFO: {All Finished Successfully}
00:16:52: INFO: FILE ACCESS SLOW!!     0.00 B in  0.015 seconds (    0.00 Bps) --- Overall to target  0.203 seconds (0.00 Bps)
Writing log to 'C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\port_trace.txt', might take a minute
Log is 'C:\Users\pc\AppData\Roaming\Qualcomm\QFIL\port_trace.txt'
Download Succeed
Finish Download

 

 

 

 

 

po ponownym uruchomieniu mam caly czas logo MI i nic sie nie dzieje...

Prosze o pomoc

Bez tytułu.jpg

Edytowane przez neptyk
Odnośnik do komentarza
Udostępnij na innych stronach

tylko ze nie mam partycji efs albo została uszkodzona i dlatego wgrywam Qfil rom od nowa...

tylko dziwne muipolska miałem prawie od początku gdy kupiłem telefon, aktualizacje ściągałem ręcznie ze strony i aktualizowałem i zawsze bylo ok,

 

a tu nagle telefon sam się wysypał i to na dobre :( moglem zostać przy romie który miałem przy zakopie, może nie byłoby takich problemów.

Edytowane przez neptyk
Odnośnik do komentarza
Udostępnij na innych stronach

super i po telefonie :(

zawiodłem na marce xiaomi i bardzo zaluje ze ten telefon kupilem ;/

nie bylbym tak wkurzony jakby ten problem byl z mojej winy, ale to sie stalo samo z siebie...

brawo xiaomi

 

========================= edit

gdy wgrywam rom prze QFIL to blokuje mi bootloader i po uruchomieniu mam caly czas logo MI i telefon nie startuje.

Acid albo ktos inny czy masz może prawidłowy rom nie blokujący bootloadera pod QFIL ?

 

Edytowane przez neptyk
Odnośnik do komentarza
Udostępnij na innych stronach

  • 1 miesiąc temu...

tylko ze mi nie wykrywa imei i nic nie da się zrobić.

gościu próbował nawet na płatnych programach i na zewnętrznych urządzeniach naprawiać i nic z tego. za dużo plików jest uszkodzonych.

 

 

potrzebny jest backup z działającego urządzenia.

Edytowane przez neptyk
Odnośnik do komentarza
Udostępnij na innych stronach

A jaka macie wersje Androida? Zauważyłem na screenach 5.0.X Powinien być 5.1.1. proponuję podnieść do tej wersji. Mam MI NOTE PRO żadnych problemów nie mam. Podnoszę wersje co tydzień.

Edytowane przez Krzysztof Dudzewicz
błąd
Odnośnik do komentarza
Udostępnij na innych stronach

  • 2 tygodnie później...

Witam, ja w temacie. Od wczoraj wieczora telefon nie wiadomo dlaczego przestał widzieć karty sim. Telefon kupiony w PL w sklepie TECHNOS, z odblokowaym bootloaderem. Wczoraj miałem aktualizować jak co tydzień.

Poczytałem, poszukałem zrobiłem MiFlash i wgrałem wersję 5.11.26 zgodnie z instrukcjami, pełen sukces..... ale nadal nie widzi karty sim.

Telefon jest na gwarancji więc pewnie go wyślę, ale z racji tego że jest mi potrzebny do codziennej pracy może ktoś pomoże jak ten temat ogarnąć.

Swoją drogą, z żadnym z poprzednich REDMI nie miałem żadnych problemów, a tu klops... 

Odnośnik do komentarza
Udostępnij na innych stronach

  • 1 rok później...

Proszę o pomoc.
Po aktualizacji mojego Mi Note Pro z MIUI 8.6 7.7.6 do MIUI 9.1 7.11.16 telefon nie widzi kart SIM.
W telefonie zainstalowane mam 2 karty SIM Telefon i Internet.
Do chwili updatu nie miałem żadnych problemów.
Niestety
w menu Wipe nie potwierdziłem Format Data.
Była tam informacja, że w przypadku potwierdzenia dane w telefonie zostaną wyczyszczone, a tego nie chciałem.

Czy jest jakiś sposób na przywrócenie IMEI?

 

Odnośnik do komentarza
Udostępnij na innych stronach

  • 4 miesiące temu...
  • Nezumi zablokował(a) ten temat
Gość
Ten temat został zamknięty. Brak możliwości dodania odpowiedzi.
×
×
  • Dodaj nową pozycję...